• membrane filter press
  • membrane filter press hydraulic
  • uniwin membrane filter press
  • membrane filter
  • membrane press filter

Membrane filter press

  • Type: Membrane filter press

  • Capacity: 1-10 ton/hour

  • Weight: 0.5-20 tons

  • Size: 5*1.3*1.6 m

  • Applications: 3 kw
The above for reference only, please click below to know more.
■ Introduction

The membrane filter chamber are formed by membrane filter plates and chamber filter plates,the feeding pump feed the sludge into the chamber and through the filtration of filter cloth,the solids and filtrate are separeted.when the soilds formed the filter cake,then blow the air into the membrane to further dry the filter cake.
The membrane filter press is specially designed for viscous and glutinous material and who has higher requirements about moisture.
The filter plates are made of strengthened polypropylene (PP) by molding ,the membrane and PP filter plates are inlayed together to make it firm and stable and assure its long lifetime.Also it is equipped with multiple safty device,which assures the safty of the workers and the stable working of the filter press.

Model:Automatic pulling plates membrane filter press XMGZ200/1250-30U
Applications:chemical,phamaceutical,food,mining,water treatment,electroplating,metallurgy,dye,textile industry.
Chamber volume:3015L
Dimensions:8.6*2*1.65 m
Capacity:3 ton/cycle
Input moisture:99%
Outlet moisture:less than 50%
Weight:15 tons
Filtering area:200 m2

This is a video shows the filtering result of our membrane filter press:


Pictures of the automatic membrane filter press:

automatic membrane filter press

■ Working Principle

Membrane Filter Press Plates have a chamber below the drainage surface that can be inflated. The common method used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. Membrane Plates are used to reduce the cake moisture content & shorten the filtration cycle time.
 
During the initial phase of the filtration cycle, so-called “fill and filtration” the process is similar to the chamber Filter Press. After reaching a predefined pressure, usually around 5 - 7 bar, depending on the sludge characteristics, sludge feeding is stopped & the rubber membranes inflated, using either water or air as squeeze medium. The cake is hereby compressed and dewatered further. Then the squeeze medium is relieved & the cake discharged.

■ Parameters

membrane filter press parameters

Inquiry
bruce@press-filter.com+86-133-83812603

Please fill in your name,email and requirements etc friend,our sales department will get back to you within 24 hours.

Your name :
* Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
INQUIRY NOW

Leave a message, enquire about the price, solutions.

Tel: +86-133-83812603
Fax: +86-371-55970066
E-mail:
bruce@press-filter.com
Zip Code: 450000